Verified product boundary
K5 tapioca CMS DS 0.3 is available as powder No grade specific powder viscosity pH packing solubility or application specification is published here
Published flake values do not define powder specifications Record the requested powder form and confirm every specification in the current TDS
Procurement answer
Use this worksheet when a procurement team needs to organise a K5 powder disperse printing evaluation without treating the grade name as approval K5 tapioca CMS DS 0.3 is available in powder form Keep the sample reference representative fabric process recipe requested form and target viscosity or named measurement method in one evaluation record For disperse printing the evidence must also include the dye and fixation conditions the representative fabric and disperse recipe and paste penetration colour yield and wash off observations Compare one controlled change at a time and retain the print observation with its test conditions Published flake values do not establish powder values No grade is confirmed for process suitability before a representative trial and the current KARN TDS The purchasing handoff should request controlled documents by grade and form and distinguish evaluated observations from open commercial or technical requirements
disperse printing record focus
disperse printing evaluation needs the fabric disperse system and printing recipe context A product name or one viscosity result cannot replace the actual printing record
For disperse printing keep the dye and fixation conditions with the representative fabric and recipe record Check paste penetration colour yield and wash off on the same trial These are evaluation observations not a pre approval of any CMS grade
Build a controlled evaluation plan
Build a controlled evaluation plan so technical and procurement teams use the same evidence Every observation should connect to a sample reference test condition and responsible person
Start this plan with the dye and fixation conditions Keep the evaluation limited to the specified powder sample and one representative disperse printing recipe
- Define the process and representative fabric
- Record the current recipe without assuming grade suitability
- State the required powder or flake form
- State the target viscosity and measurement method
- Set acceptance observations before the trial
Prepare a complete sample request
Prepare a complete sample request so technical and procurement teams use the same evidence Every observation should connect to a sample reference test condition and responsible person
A usable disperse printing sample request identifies the representative fabric and disperse recipe before KARN reviews the requested K5 powder sample
- Name the requested grade and form
- Describe the printing process and fabric
- Provide target viscosity or the laboratory method
- Explain the current printing issue
- Identify the responsible technical contact
Review the current TDS before approval
Review the current TDS before approval so technical and procurement teams use the same evidence Every observation should connect to a sample reference test condition and responsible person
Use the current TDS to confirm the named K5 powder sample Keep the dye and fixation conditions as process evidence rather than treating it as a published product specification
- Confirm the document names the same grade
- Confirm powder or flake form is explicit
- Separate published facts from requested values
- Check the named viscosity method and conditions
- Record unresolved points for KARN confirmation
Create a reproducible trial record
Create a reproducible trial record so technical and procurement teams use the same evidence Every observation should connect to a sample reference test condition and responsible person
The trial record should preserve paste penetration colour yield and wash off observations with the sample reference and measurement method so one result can be compared with a later trial
- Assign the sample and trial reference
- Record fabric recipe and preparation order
- Record product form and conditioning
- Record viscosity method result and time
- Record print observations without changing multiple variables
Hand off evidence to procurement
Hand off evidence to procurement so technical and procurement teams use the same evidence Every observation should connect to a sample reference test condition and responsible person
The handoff should state the representative fabric and disperse recipe and separate paste penetration colour yield and wash off observations from any unconfirmed purchasing requirement
- Attach the sample and trial references
- State the tested grade and form
- Summarize the process and recipe context
- Separate observations from commercial requirements
- Request current controlled documents before order approval
Formal confirmation boundary
This page is an evaluation and communication tool It is not a product certificate TDS SDS COA or order document Request controlled documents by grade and form A COA requires an actual order or batch reference